This is a digital download for our Claymore Mine. This compressed ZIP folder contains four 3MF files for the Claymores Body, Cap, Legs and Pegs. To assemble as we have its recommended to also purchase several metal fittings. This includes 6#32 Hex Nuts with matching 6x32 Screws with a length of 3/8 inch, and 90 degree L Brackets sized to 20mm by 20mm. All these fittings can be found on Amazon. Links are provided below.
 
https://www.amazon.com/dp/B08ZD89JN8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
 
https://www.amazon.com/dp/B0CQG4LRYG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
 
https://www.amazon.com/dp/B01HQAT98A?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
 
A sped up instructional video is attached in the gallery. 
 
1. Install two hex nuts into the available slots on the claymores body. Glue can also be applied for added adhesion.
 
2. Install four hex nuts (1 each) into the four legs.
 
3. Screw the L brackets on preferably with a coarse screw small enough to fit into the hex nut while also being long enough to dig into the claymores body. The screws included with the above L brackets work well as they cross thread with the hex nut and dig into the claymores body.
 
4. Screw two legs on each bracket with an additional hex nut added in between the two legs. This hex nut will aid in keeping the screws from coming loose.